Description
Finish off your HEMI Swap project with the finest exhaust system available for your 1966-1970 Mopar B-Body. Available in either 2.5″ or 3″ diameter, straight through 304 Stainless steel zero restriction mufflers and 304 stainless steel mandrel bent exhaust tubing. Specifically designed for HEMI swap vehicles and a direct fit to BH2358 Long Tube Headers. The removable head pipes allow the first 24″ of exhaust pipe to be removed in seconds with slip couplers allowing the transmission to be removed without dropping the entire exhaust. High tuck design for best possible ground clearance for lowered cars, and OEM style turn down tail pipes for a factory look.
Specifications:
| Description_ASC | Holley Performance Emission Code 8: This product is engineered to facilitate the installation of a later model; emissions friendly engine into a vintage/classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply: If there is a reasonable basis for knowing that emissions are not adversely affected as described in EPA Memo 1A/The resulting vehicle is identical (with regard to all emissions related parts; engine design parameters and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis/The vehicle is a uncontrolled vehicle-Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles/An EO legal engine swap kit is utilized (such as a GM EROD)/The vehicle is being used for Competition Use Only-Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street. NOTE: Consumers are responsible for complying with laws prohibiting tampering; and for ensuring that modified vehicles are operated in a manner that complies with applicable laws. |
| Description_DEF | Exhaust System Kit |
| Description_DES | Blackheart Exhaust System |
| Description_EXT | Blackheart Exhaust System; Fits w/1966-1970 Mopar B-Body Gen III Hemi Swap; 3 in. Tubing; Dual Rear Exit; Stainless Steel; |
| Description_FAB | Available In Either 2.5 in. Or 3 in. Diameter |
| Description_FAB | Designed To Work With Popular Transmissions |
| Description_FAB | Direct Fit To BH2358 Hooker Blackheart Headers |
| Description_FAB | H-Pipe Design For A Deep Muscle Car Exhaust Note |
| Description_FAB | Hand Welded Construction/High Quality/Corrosion Resistant |
| Description_FAB | High Tuck Design To Maximize Ground Clearance |
| Description_FAB | Includes Attaching Hardware And Instruction |
| Description_FAB | Limited Lifetime Warranty |
| Description_FAB | Works w/Vehicles Originally Equipped w/Single Or Dual Exhaust |
| Description_INV | 1966-67 B-BODY HEADER-BACK SYSTEM |
| Description_LAB | Proposition 65 |
| Description_MKT | Finish off your HEMI Swap project with the finest exhaust system available for your 1966-1967 Mopar B-Body. Available in either 2.5 in. or 3 in. diameter, straight through 304 Stainless steel zero restriction mufflers and 304 stainless steel mandrel bent exhaust tubing. Specifically designed for HEMI swap vehicles and a direct fit to BH2358 Long Tube Headers. The removable head pipes allow the first 24 in. of exhaust pipe to be removed in seconds with slip couplers allowing the transmission to be removed without dropping the entire exhaust. High tuck design for best possible ground clearance for lowered cars, and factory style turn down tail pipes for a factory look. |
| Description_MKT | Finish off your HEMI Swap project with the finest exhaust system available for your 1966-1970 Mopar B-Body. Available in either 2.5″ or 3″ diameter, straight through 304 Stainless steel zero restriction mufflers and 304 stainless steel mandrel bent exhaust tubing. Specifically designed for HEMI swap vehicles and a direct fit to BH2358 Long Tube Headers. The removable head pipes allow the first 24″ of exhaust pipe to be removed in seconds with slip couplers allowing the transmission to be removed without dropping the entire exhaust. High tuck design for best possible ground clearance for lowered cars, and OEM style turn down tail pipes for a factory look. |
| Description_SHO | Exhaust System Kit |
| Exhaust Type | Crossmember Back |
| Exit Position | Dual Rear |
| height | 16.0 |
| length | 52.5 |
| LTL | N |
| Material | 304 Stainless Steel |
| Tail Pipe Diameter | 3.000 in. |
| Tip Diameter | 3.000 in. |
| Tubing Diameter | 3.000 in. |
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
| weight | 61.0 |
| width | 19.5 |
Explore more from our collection.
Reviews
There are no reviews yet.